horizontal stabiliser การใช้

• This allowed longitudinal trim in the absence of a separate horizontal stabiliser.
• The horizontal stabiliser and fin were sharply swept at their leading edges.
• Without a horizontal stabiliser the aircraft entered an uncontrollable dive.
• The horizontal stabiliser had a straight leading edge but tapered at the rear.
• The empennage consisted of a single, large, triangular fin and biplane horizontal stabilisers.
• On a three-surface aircraft, the tailplane acts as a conventional horizontal stabiliser.
• The rear section is called the elevator, and is usually hinged to the horizontal stabiliser.
• This featured a redesigned wing of greater span, and modified horizontal stabiliser and landing gear.
• It has a horizontal stabiliser in a T-tail configuration and a retractable tricycle landing gear.
• The monoplane horizontal stabiliser carried servo assisted elevators and a pair of fins with horn balanced rudders.
• The entire empennage is rotated vertically to actuate the horizontal stabiliser, and sideways to actuate the fin.
• Booms carried the aft-mounted elongated triangular fin and horizontal stabiliser, with rectangular rudder and elevator.
• Unlike previous British airship designs, the fins and horizontal stabilisers were cantilevered structures, with no external bracing.
• A V-shaped pelikan tail could be implemented, replacing conventional vertical tail fins and horizontal stabiliser structures.
• An interesting feature of the YA-19 design was its horizontal stabiliser located forward of the vertical tail.
• Horizontal stabilisers were carried to both the front and rear, with a single rudder above the rear surface.
• The two aircraft had collided, the tail of KZA1907 cut through SVA763's left wing and horizontal stabiliser.
• Thus, no horizontal stabiliser was needed and the craft was tailless, allowing the fuselage to be relatively short.
• The Wrights also initially referred to their horizontal stabilisers as horizontal rudders ] to be moved downwards or upwards ."
• Another problem with a separate horizontal stabiliser is that it can itself achieve local supersonic flow with its own shock wave.